Menu
Research / Publications

Dr. Rafat Al-Waked

International Journal Papers

  • Nasif M., AL-Waked R., Morrison G. and M. Behnia M., “Modeling of Air to Air Enthalpy Heat Exchanger,” Heat Transfer Engineering, vol. 33 (12), pp. 1–15, 2012 (IF: 1.2).
  • Al-Waked R., Groenhout N., Partridge L., “Indoor Energy Analysis of Food Distribution Warehouse,” International Journal of Thermal & Environmental Engineering, vol. 2 (1), pp. 27-34, 2011.
  • Al-Waked R., “Effect of Façade Type on the Cooling Load of a Multi-Storey Building,” International Journal of Thermal & Environmental Engineering, vol. 1 (1), pp. 9-14, 2010.
  • Nasif M., AL-Waked R., Morrison G. and M. Behnia M., “Membrane heat exchanger in HVAC energy recovery systems, systems energy analysis,” Journal of Energy and Buildings, vol. 42, pp. 1833–1840, 2010 (IF: 2.254).

International Conference Papers

  • Alzoubi M.F., Tanbour E.Y. and Al-Waked R., “Compression and hysteresis curves of nonlinear polyurethane foams under different densities, strain rates and different environmental conditions,” Proc. the 2011 ASME International Mechanical Engineering Congress & Exposition (IMECE11), Denver, Colorado, USA, November 11-17, 2011.
  • Tanbour E.Y., Al-Waked R., and Alzoubi M.F., “Experimental Study of a Waste Heat Recovery System for Supplemental Heaters,” Proc. the Energy and Sustainability 2011 (ESUS 11), Alicante - Spain, April 11-13, 2011.
  • Al-Waked R., Nasif M., Groenhout N., Behnia M., “Indoor Air Quality Simulations of a Construction Site,” Proc. the 7th International Conference on Flow Dynamics (ICFD 2010), Sendai, Japan, November 1-3, 2010.
  • Nasif M., Al-Waked R., Nasser K., Badran M., “Terwindle Rest Home Fire Investigation and Code Compliance,” Proc. the 3rd SFPE-SAC Fire Technology Conference & Exhibition, Al-Khobar, KSA, October 19-20, 2010.
  • Al-Waked R., “Effect of Façade Type on the Cooling Load of a Multi-Storey Building,” Proc. the International Engineering Conference on Hot Arid Regions (IECHAR 2010), Al-Ahsa, KSA, May 1-2, 2010.

Conferences Presentations

  • Indoor Energy Analysis of Food Distribution Warehouse, presented at the International Conference on Energy, Water & Environment (ICEWE 2010), Amman, Jordan, 2010.
  • Indoor Air Quality Simulations of a Construction Site, presented at the 7th International Conference on Flow Dynamics (ICFD 2010), Sendai, Japan, 2010.
  • Terwindle Rest Home Fire Investigation and Code Compliance, presented at the 3rd SFPE-SAC Fire Technology Conference & Exhibition, Al-Khobar, KSA, 2010.
  • Effect of Façade Type on the Cooling Load of a Multi-Storey Building, presented at the International Engineering Conference on Hot Arid Regions (IECHAR 2010), Al-Ahsa, KSA, 2010.

Dr. Omar Bataineh

  • Bataineh, O., and Al-dwairi, A., "Application of statistical process control to improve product quality in manufacturing processes", 2nd International Conference on Mechanical, Industrial, and Manufacturing Technologies, Singapore, Vol. 2, pp. 287-289, 2011
  • Bataineh, O., "An analytical model to predict the release force in a soft hub fitted over a rigid shaft", Proceedings of the 2010 International Conference on Advances in Mechanical Engineering, Shah Alam, Selangor, Malaysia, pp. 461-464 , 2010

Dr. Esam Jassim

Book Chapters

  • Esam Jassim "Hydrate formation and deposition in Natural Gas flow line", Lambert Academic Publishing, ISBN 978-3-8473-1930-6, 2012.

International Journal Papers

  • Esam I. Jassim, Steven A. Benson, Frank M. Bowman, and Wayne S. Seames, “The influence of Fragmentation on the Behavior of Pyrite Particles during Pulverized Coal Combustion”, Fuel Processing Technology,92(5), pp. 970–976, 2011.

International Conference Papers

  • Esam I. Jassim; Steven A. Benson; Wayne S. Seames, "CFD Simulation of IN-SITUE Drop Tube Furnace”, proceedings in AIChE Meeting, Reaction Engineering for Combustion and Pyrolysis I, Minneapolis, MN, USA, October 16-21, 2011.
  • Esam I. Jassim, “Statistical Modelling of Constituents in Ash”, proceedings in the 2nd International Conference on Renewable Energy: Generation and Applications, Al Ain, UAE, March 4-7, 2012.

Dr. Nader Sawalhi

Book Chapters

  • Sawalhi, N, “Spall Detection, Diagnosis and Quantification in Rolling Element Bearings Using State of the Art vibration analysis Techniques”, chapter accepted for publication in the book “Fault Diagnosis in Robotic and Industrial Systems”, Iconcept press Ltd, 2012. ISBN 978-0980733099
  • Endo, H and Sawalhi, N.,"Gearbox Simulation Models with Gear and Bearings Faults" chapter accepted for publication in the book "Mechanical Engineering", INTCH, ISBN 979-953-307-626-2.

International Journal Papers

  • Deshpande, L, Sawalhi, N and Randall, R.B., “Improved gearbox simulations for diagnostic and prognostics purposes using finite element model reduction techniques”. Australian Journal of Mechanical Engineering, Vol. 8 (2), pp. 91-101,2011.
  • Barszcz, T and Sawalhi, N., “Wind turbines’ rolling element bearings fault detection enhancement using minimum entropy deconvolution”, DIAGNOSTYKA -Diagnostics and structural health monitoring, Vol. 53 (9), pp. 53-59, 2011.

International Conference Papers

  • Deshpande, L, Sawalhi, N and Randall, R.B., “ Gearbox Fault Simulation using Finite Element Model Reduction Technique” Proceedings of ACOUSTICS 2011 2-4 November 2011, Gold Coast, Australia.
  • Randall, R. B, Sawalhi, N and Coats, M., “Separation of Gear and Bearing Fault Signals from a Wind Turbine Transmission under Varying Speed and Load”, Condition Monitoring of Machinery in Non-Stationary Operations, 2012, Part 1, 3-12, DOI: 10.1007/978-3-642-28768-8_1, 12, March 26 - 28, 2012 - Hammamet – Tunisia.

Dr. Iyad Hijazi

International Conference Papers

  • Park, Y. H. and Hijazi, I. A., Properties of Bimetallic Core-Shell Nanoclusteres, Proceedings of the 2012 ASME Pressure Vessels and Piping Conference, PVP2012-78232, 2012

Dr. Hassan Abdulmouti

International Journal Papers

  • Hassan Abdulmouti. Surface Flow Generation Mechanism Induced by Bubble Plume. Yanbu Journal of Engineering and Science (YJES). Second issue. PS-M02-28 (50-67). 2011

Dr. Nader Nader

International Conference Papers

  • “CRACK PROPAGATION MODEL OF SCRATCHED SAMPLES OF AL 2024-T3 CLAD”, N. A. Nader and J. E. Talia, IN-TECH 2011 , Bratislava, Slovakia, p. 402